We have a Celeron 1.7 GHz with Win98SE using LPT1
for keying. I've heard a recording of my signal
at LZ1ABC and I think the keying sounds choppy.
Beyond that, there are some occasions when what is
being sent sounds like the computer is drunk! :-)
73,
Bob
K3PH
VE3DZ wrote:
> I have same problem on PII 266 with W98SE using LPT for keying.
>
> Yuri VE3DZ
>
> ----- Original Message -----
> From: "Ed K1EP" <k1ep.list@gmail.com>
> To: "N7MAL" <N7MAL@CITLINK.NET>; <ct-user@contesting.com>
> Sent: Wednesday, December 14, 2005 10:36 PM
> Subject: Re: [ct-user] CW keying
>
>
>
>>The interface cannot interject spaces and pauses into the CW, it is just a
>
> transistor switch, turned on and off by the computer port. The interfaces I
> use are all designed and built by myself. They work fine for DxBase,
> Writelog, N1MM, CTWin, CTDos, and various other programs. I ran CTWin for
> SS CW using a P4 3GHz laptop running XP. Nothing else was running, except
> Icom radio control. The CW was not smooth. There were pauses in the CW, no
> dits or dots were missing, just timing was erratic, which is consistent with
> running under windows. RF was also not a factor as the erratic timing can
> be reproduced without actually transmitting. I also run CW at 30 to 34wpm,
> which makes timing more critical.
>
>>
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web: http://www.k1ea.com/
>
>
>
--
+----------------------------------------------+
| Bob Schreibmaier K3PH | E-mail: k3ph@ptd.net |
| Kresgeville, PA 18333 | http://www.dxis.org |
+----------------------------------------------+
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|