Found my problem....Needed to have Computers 2 and 3 set to REMOTE for
the TNC setting....
Rich
-----Original Message-----
From: ct-user-bounces@contesting.com
[mailto:ct-user-bounces@contesting.com] On Behalf Of Rich Hallman - N7TR
Sent: Saturday, October 29, 2005 11:22 AM
To: ctuser
Subject: [ct-user] Packet Send in Multi Config?
Importance: High
First time around with linking computers....
Here is my problem...
Have 3 Computers all running ver 10.02.008 with the -enet switch.
Computer 1 is connected via telnet to the N7TR Cluster.
Computers 1-3 are seeing received packet spots and logs are updating OK.
When I send a packet spot from Computer 1...Spot is sent to N7TR Cluster
OK.
When I send a spot from Computers 2 and 3...No spot is sent to the
cluster system.
What am I doing wrong?
Thanks...
Rich
****************************
Rich N7TR
ex KI3V, N3AMK, WB3JOV
www.n7tr.com
Telnet: dxc.n7tr.com N7TR DXCluster
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|