Yes, CTWin also works with pin 14 on LPT1. I built a box that has that
pin driving a 2n2222a and some radio shack relays to switch keying, amp
t/r line and foot switch between the two radios.
Mark Bailey wrote:
>Hi Noel:
>
>It's often (usually?) done by using Pin 14 on LPT1 to
>switch between radio 1 and radio 2 and using an external
>relay with CT DOS (and, I presume, CT WIN). You can also
>use two parallel ports and key each radio seperately.
>
>73,
>
>Mark, KD4D
>
>Noel Poulin wrote:
>
>
>>Hi
>>I would like to know how can I key(cw) on radio 2 with CTWIN??
>>I key cw on radio1 with the LPT1 port.....(it's working great)
>>How can I switch the keying on radio 2 ???Is it by the same LPT1 or by
>>another port like LPT2.
>>Your help would be very much appreciated
>>Thanks
>>NOEL ve2ryy
>>_______________________________________________
>>CT-User mailing list
>>CT-User@contesting.com
>>http://lists.contesting.com/mailman/listinfo/ct-user
>>CT on the web: http://www.k1ea.com/
>>
>>
>>
>>
>
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web: http://www.k1ea.com/
>
>
>
>
--
'Never argue with an idiot. They drag you down to their level then beat you
with experience.' -anon
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|