Peter (Dl4FN) and John(K3CT)
Thanks for the posting. I have loaded the WIN char version and it is running
fine. The radio and TNC interface also worked without pain. I am using LPT1
to send CW, so ok at this side too.
It is amazing how a good application as CT keeps up. I am still managing a
DXPC node using AK1A DOS software. At the end of the day, the application's
quality and robustness prevail.
Regards to all
Fred Carvalho PY2XB
-----Mensagem original-----
De: John Bednar [mailto:k3ct@fast.net]
Enviada em: segunda-feira, 25 de outubro de 2004 23:31
Para: 'py2xb'
Assunto: RE: [ct-user] CT for Windows and COM8
I've been using CTWin for several years and it's improved every
year. The advantages of CTWin is that it can receive spots from the
internet (telnet option). It can NOT send CW via the COM port.
Computer to computer linking is very easy with CTWin and Ethernet.
You can NOT use a wireless router.
John
k3ct@fast.net
-----Original Message-----
From: ct-user-bounces@contesting.com
[mailto:ct-user-bounces@contesting.com] On Behalf Of py2xb
Sent: Monday, October 25, 2004 7:45 AM
To: ct-user@contesting.com
Subject: [ct-user] CT for Windows and COM8
Hello. I am an old user of CT. It is been years that I have not used
it, but
I am glad it is still around.
I just have a couple questions to start with and any help is
appreciated :
1) Is it worthwhile to use the character-mode version for Windows ?
2) I have no problem to use the DOS version. However even though it
says
COM1 thru COM8 can be used I cannot set the COMTSRx programs to
COM8. I can
change the base address and the IRQ to match what I need except by
the COM
number
Thanks guys
Fred PY2XB
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|