CT-User
[Top] [All Lists]

[ct-user] Re: NAQP File

To: "N7MAL" <N7MAL@CITLINK.NET>, ct-user@contesting.com
Subject: [ct-user] Re: NAQP File
From: "Ken Wolff" <ken@k1ea.com>
Reply-to: Ken Wolff <ken@k1ea.com>
Date: Thu, 8 Jan 2004 09:53:10 -0500
List-post: <mailto:ct-user@contesting.com>
The quick answer is, use the text command SETSTATE to enter your state, which 
will be used in the .LOG file.

The longer answer is, CT should be prompting you for a state at startup if it 
is not filled in. This is an easy bug to fix and I'll release something 
tonight. Also, CT doesn't use the state from your mailing address because it 
might not be the state you are operating from.

There is an extra '0 or '1' character at the end of each QSO line because the 
multi two category requires it. I could suppress this for single op entries, 
but it is actually kind of interesting to look at if you are doing a SO2R with 
two computers. I might take it out for SO logs.

The robot doesn't care about column alignment of the Cabrillo output, but I 
have changed the field sizes to match the example Cabrillo file anyway.

Note to Mal - my direct mail to you keeps bouncing. The bounce says your mailer 
won't accept mail from a dynamic IP address although I have a static address. 
Is there another email address I can use for you?

73, Ken


> ------------Original Message------------
> From: "N7MAL" <N7MAL@CITLINK.NET>
> To: <ct-user@contesting.com>
> Cc: <ken@k1ea.com>, "Jim Reisert" <ad1c@contesting.com>
> Date: Wed, Jan-7-2004 5:45 PM
> Subject: NAQP File
> 
> I don't know how important the format is in the Cabrillo file for NAQP, I
> assume(ass/u/me) it's important.
> 
> The top 5 QSO's were generated by the new CT NAQP. The bottom 5 QSO's were
> generated by another program which I have used for NAQP and my logs have
> never been rejected.
> The CT version leaves out my section, adds a point column, and the column
> spacing is different. Both excerpts were extracted using notepad.
> 
> 
> QSO: 14000 CW 2004-01-03 1812 N7MAL         MAL             K6NA
> GLEN        CA  0
> QSO: 14000 CW 2004-01-03 1812 N7MAL         MAL             K7NA
> VINCE       CA  0
> QSO: 14000 CW 2004-01-03 2326 N7MAL         MAL             NA5S
> BRITT       NM  0
> QSO: 14000 CW 2004-01-03 2326 N7MAL         MAL             K3ZO
> FRED        MD  0
> QSO: 14000 CW 2004-01-03 2327 N7MAL         MAL             N7US
> JIM         AZ  0
> 
> 
> QSO: 14000 CW 2003-08-02 2044 n7mal      MAL        AZ  N7ZN       JOHN
> ID
> QSO: 14000 CW 2003-08-02 2045 n7mal      MAL        AZ  K4RO       KIRK
> TN
> QSO: 14000 CW 2003-08-02 2046 n7mal      MAL        AZ  K4WX       DON
> TN
> QSO: 14000 CW 2003-08-02 2047 n7mal      MAL        AZ  K0RF       CHUCK
> CO
> QSO: 14000 CW 2003-08-02 2048 n7mal      MAL        AZ  K6RB       ROB
> CA
> 
> 
> 
> 
> MAL                N7MAL
> BULLHEAD CITY, AZ
> www.citlink.net/~suzyq/N7mal.htm
> www.geocities.com/n7mal
> 

_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

<Prev in Thread] Current Thread [Next in Thread>
  • [ct-user] Re: NAQP File, Ken Wolff <=