Hello TOM
If you'll follow this link http://k1ea.com/download/index.htm you'll
see the words "WIN95 is not supported" in ct9.92.001 description.
By the way, did you try to load .bin file with a some hundreds of qsos ?
If you did, was your computer slowed down ? I ask this question
because my AMD K6 233 MHz 32 Mb RAM Win98SE computer was awfully slowed
down during the first use of CT9.92.001 in WWCW.
Tuesday, December 16, 2003, 7:12:17 AM, you wrote:
Tac> Tonight I tried to enter the 21st Century (well, the late 20th at least)
and
Tac> install CTWin 9.92.001 on my old Win95 shack machine. It's a Compaq
Presario
Tac> 6000 at 300MHz and 96 meg of RAM. Everything seems to work fine including
Tac> packet and rig control on the COMM ports....but cant seem to make the rig
key and
Tac> send CW off the LPT1 port. In fact, with the SOUND command on....dont
even
Tac> hear CQ from the computer speaker when I hit F1. Works fine with the old
DOS
Tac> version, though. Am I missing something simple?
Tac> Tom/K1TH
Tac> _______________________________________________
Tac> CT-User mailing list
Tac> CT-User@contesting.com
Tac> http://lists.contesting.com/mailman/listinfo/ct-user
Tac> CT on the web: http://www.k1ea.com/
--
Best regards,
Serge mailto:us4lgw@ukrpost.net
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|