I just installed the latest available version (991001) and I
am still experiencing the same ID symptoms in the talk window.
Those symptoms are that station ID's are not assignable in
the Alt-I talk window, and are fixed at values of "10" or "15"
regardless of the current logging band.
Following is some more information from my setup (which I should
have provided with the original post.) I did remember to type
RUN1 and RUN2 commands into the respective stations before testing
the network. I did notice that Station 2 actually said "Station One"
in the Summary window until I typed RUN2 into the call field, even
though the Information Sheet correctly shows Station Number: 2 when
the program is starting up.
------------- CT.CFG from Station 1:
Name: Kirk
Call: K4RO
Zone: 4
Club: TCG
Contest Type: CQWW
Category: M2
Station Number: 1
Network: COM1, 1200
Radio: None
CWPORT: LPT1
Mode: SSB
Voice Keyer: DVP
CQ: CQ TEST K4RO
Exchange: 5NN4
QRZ: TU K4RO
------------- Startup batch file for Station 1:
comtsr1 -b1200
dvptsr
ct x
dvptsr -u
comtsr1 -u
------------- CT.CFG from Station 2:
Name: Kirk
Call: K4RO
Zone: 4
Club: TCG
Contest Type: CQWW
Category: M2
Station Number: 2
Network: COM2, 1200
Radio: None
CWPORT: None
Mode: SSB
Voice Keyer: None
CQ: CQ TEST K4RO
EXCHANGE: 5NN4
QRZ: TU K4RO
------------- Startup batch file for Station 2:
comtsr2 -b1200
ct x
comtsr2 -u
-----------------------------------------------------------------
Thanks again for any suggestions or hints. I am CT illiterate.
-Kirk K4RO
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|