CT-User
[Top] [All Lists]

[ct-user] CT 9.90.006 available

To: <ct-user@contesting.com>
Subject: [ct-user] CT 9.90.006 available
From: k1vu at tmlp.com (R Johnson)
Date: Sun Jun 8 12:10:51 2003
Hi Tim:
I just checked out the DOS version of 9.90.006 and ALT-F1/ALT-F2 work fine here.

In the DOS version of 9.90.005 there was the problem that you describe and I 
reported
it to Ken and he fixed it.

Just to make sure, open a new test vhf contest and check your version at the 
bottom of
the screen.  IMPORTANT, do this BEFORE you enter a QSO.  The version disappears 
after
the first QSO is entered.

If you find that you have 9.90.006 please run another test while you are there.
starting with 6M, enter a call & grid then move up a band (ALT-F2) and enter 
the same
call and grid. repeat this all the way up to LHT then do a writelog and see if 
it works.

TNX es 73
Bob, K1VU


At 20:47 6/7/2003 , Tim Long wrote:
>Hi Ken, et al,
>
>Just tested the DOS version of 9.90.006 - 
>
>Band up works.  Band down does not.  Thanks & 73,
>
>Tim, W2UI
>
>
>----- Original Message -----
>From: "Ken Wolff" <ken@k1ea.com>
>To: "'reflector ct-user'" <ct-user@contesting.com>
>Sent: Sunday, June 01, 2003 9:45 AM
>Subject: [ct-user] CT 9.90.006 available
>
>
> > 9.90.005
> >
> > * fixed the arrow left and right keys (tnx K3CT)
> >
> > * fixed the DXCC countries count once per band in NEQP bug (tnx K1TTT)
> >
> > * added FD category "F"
> >
> > * fixed RST reports showing up in FD with band changes (tnx KB3HF)
> >
> > * put the 15 minute QSY timer back in FD (tnx KB3HF)
> >
> > 9.90.006
> >
> > * fixed band changing and duping on the higher bands in VHF tests (tnx
>K1VU)
> >
> > * fixed category "F" in FD (tnx W2CE)
> >
> >
> >
> > _______________________________________________
> > CT-User mailing list
> > CT-User@contesting.com
> > http://lists.contesting.com/mailman/listinfo/ct-user
> >
> >
>
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user

<Prev in Thread] Current Thread [Next in Thread>