Here's something which others should check for other rigs.
VERSION 9.85 DOS version running under DOS. Tested with ARRL DX
contest.
On the FT100 the following problems appeared with rig control:
1)Grabbing a spot puts the radio in split mode and LSB on the low
bands (USB on the higher bands) when in a cw contest. Didn't check
SSB contests/modes
2)Pulling a station from the QSO list above the active qso and putting
it into the band map with ALT-j does the following:
a) wipes out the call in the QSO list (it is still there in reality--
if one scrolls up and back down, it magically reappears)
b) puts it in announce spot window
c) uses the current radio freq not the QSO freq.
d) pulling a station from the bandmap also changes the mode from CW
to a sideband mode.
It does properly get rig freqs and changes bands fine via Function
keys.
73 de Brian/K3KO
Jim Reisert AD1C wrote:
>
> CT 9.85 is now available from the CT Vault:
>
> http://www.k1ea.com/ctvault/
>
> Here are Ken's release notes. It's imperative that EVERYONE check their
> radios
> with this new version. Ken has done a TON of work in this area. For example,
> ICOM radios now set and unset split correctly, AS LONG AS YOU ONLY USE CT to
> change the split status (using the "-" key), i.e. keep your fingers off the
> radio's SPLIT button. Also, if anyone has a FT-847 please test it - it might
> work now.
>
> Don't wait until the day before ARRL DX to test this version out!
>
> 73 - Jim AD1C
>
> 9.85
>
> * A lot of testing was done with K1TTT and K1EP with regard to testing
> mode and radio issues.
>
> * Thanks to a loan from W1JR, the FT817 is online.
>
> * All the flovaors of multimode contests should be stable with respect
> to changing mode issues. When changing bands, the radio should return
> to the last mode used.
>
> * There are some things to be aware of when using radio control
>
> 1. If you toggle ALT F4 too quickly, IE the radio doesn't get
> completely switched before trying to switch back, you can lose
> your run frequency. We all HATE that. In time I hope to have a
> completely secure method worked out.
>
> 2. If you toggle to a spot in a multi-mode contest CT will not
> automatically set the mode for you. You need to set it yourself.
> Unfortunately when you ALT-F4 to your run frequency and ALT-F4
> back to the spot you will have to set the mode again. I
> anticipate fixing this in the near future.
>
> 3. I don't have access to most of the radios on the supported list,
> so you will have to try as many contest/category/modes as possible
> and give me good feedback before all is solid.
>
> 4. I have been getting random "radio timeout" messages with the MP,
> but it doesn't seem to affect operation at all.
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user
|