Yes, I think so. Virtually all computers have a sound card, windows
already knows how to handle it. The only think it lacks is a keying
line, and that is handled by ptt output on lpt or serial ports. The
rigblaster interface boxes perform the function of the dvp cables and
allow you to control audio levels. There is also much more that can be
done with the sound cards, like recording/compressing audio and doing
dsp processing on rx or tx audio.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: Robert Wood [mailto:rwood90@direcway.com]
> Sent: Monday, December 02, 2002 11:52
> To: David Robbins
> Subject: Re: [ct-user] dvp and ctwin
>
> good point !
>
> maybe we could get them to build it directly on the motherboard? at
> least
> in my laptop !
>
> Is the built-in sound board "the wave of the future" for our voice
keyers?
>
>
> ----- Original Message -----
> From: "David Robbins" <k1ttt@arrl.net>
> To: "'Robert Wood'" <rwood90@direcway.com>; <ct-user@contesting.com>
> Sent: Monday, December 02, 2002 5:38 AM
> Subject: RE: [ct-user] dvp and ctwin
>
>
> Of course another problem is that new computers don't even have isa
> slots to plug in the board, making a lack of driver purely academic.
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>
>
> > -----Original Message-----
> > From: ct-user-admin@contesting.com
> [mailto:ct-user-admin@contesting.com]
> > On Behalf Of Robert Wood
> > Sent: Monday, December 02, 2002 03:39
> > To: ct-user@contesting.com
> > Subject: Re: [ct-user] dvp and ctwin
> >
> > As best I can tell this is the current home page of the
> >
> > DVP
> >
> > http://www.hfpower.com/dvp/
> >
> > It is held out as "the wave of the future" by ACOM on their web
page.
> > Without a windows driver will not the DVP board will die a slow
death?
> >
> > I have two. I like them and they work. I would like to see them
> > progress
> > into the windows product for ALL the contest
> >
> > logging programs - the DVP is one reason I still contest in DOS mode
> > although I find the DVP board very difficult to plug into a laptop -
> hi.
> >
> > 73 Robert W5AJ
> >
> > ----- Original Message -----
> > From: "Jim Reisert AD1C" <jjreisert@alum.mit.edu>
> > To: "4x6zk" <4x6zk@iarc.org>; <ct-user@contesting.com>
> > Sent: Sunday, December 01, 2002 6:56 PM
> > Subject: Re: [ct-user] dvp and ctwin
> >
> >
> > DVP is not supported. It says so right on the CT Vault web page.
> >
> > 73 - Jim AD1C
> >
> > At 07:43 PM 12/1/2002 +0200, 4x6zk wrote:
> >
> > >shalom to all
> > >I installed ctwin last version.
> > >cw via lpt1 is working fine,cat via com1 is working fine, but the
dvp
> > card
> > >is not working at all any ideas?
> >
> >
> > --
> > Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
> > USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
> > PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC
> >
> > _______________________________________________
> > CT-User mailing list
> > CT-User@contesting.com
> > CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user
> >
> > _______________________________________________
> > CT-User mailing list
> > CT-User@contesting.com
> > CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user
|