Lots more to test.... here is the list I was making:
1. alt-f1/f2 up and down bands
2. check ssb mode tracks band changes
3. ctrl-f1/f2 mode changes
4. radio band change, check ct tracks
5. radio mode change, check ct tracks
6. radio select invalid mode, make sure ct doesn't crash
7. watch alt-j freq broadcast
8. type in frequency to set radio
9. grab simplex spot from spot window
10. grab split spot from spot window
11. set split with -
12. clear split with -
13. send normal spot
14. send split spot
15. grab spot on another band, check freq/mode
16. grab spot that should be a different mode in two mode contest
17. f5, grab spot, f4, f4, f4, to swap and return to run freq
18. set split, f5, grab spot, f4, f4, f4, to swap and return to run freq
and split
19. ctrl-> to grab spot
20. alt-> to grab spot
21. log a qso on each band/mode
22. ctrl-enter spot into band map from vfo a
23. ctrl-enter spot into band map from vfo b
more???
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: ct-user-admin@contesting.com
[mailto:ct-user-admin@contesting.com]
> On Behalf Of John Bednar
> Sent: Friday, November 01, 2002 03:44
> To: ct-user@contesting.com
> Subject: [ct-user] radio testing
>
>
> Please check this list of radio tests intended to verify proper
operation
> with CT. What am I missing?
>
> John
> k3ct@fast.net
>
>
> Type a frequency on every band. Verify that the radio is set
> to that frequency.
>
> Log a dummy station on each band, verify that the correct
> band was logged.
>
> Press Up Band (or the band button) on the radio through all bands
> to see if the computer tracked.
>
> Press Down Band (or the band button) on the radio through all bands
> to see if the computer tracked.
>
> Press Alt-F1 through all bands to see if the radio tracked.
>
> Press Alt-F2 through all bands to see if the radio tracked.
>
> Enter a split frequency with the minus key. Look for split operation,
> correct frequency and mode in VFO2.
>
> In a multimode contest, check the mode operation with CTRL-F1
> and CTRL-F2.
>
> Grab and log spots with CTRL-Right Arrow. Check to see if the radio
> was programmed correctly and qso logged correctly.
>
> Grab and log spots with ALT-Right Arrow. Check to see if the radio
> was programmed correctly and qso logged correctly.
>
> Type Alt-F3 to see a packet spot is generated with the proper
> radio frequency.
>
> Type Alt-F3 with the radio set for split operation and check the
> QSX frequency.
>
> Turn the VFO to see if it's tracked in the band map, watch for radio
> timeouts.
>
> Enter a callsign and press CTRL-CR to see if the call and frequency
> was placed into the Band Map.
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user
|