At one time CT returned to the band of the last QSO on restart. Someone
requested that CT read the radio to set the band and mode. After that
change things started working poorly.
I haven't put too much effort into this, as it doesn't affect ones
ability to operate the contest very much.
I am going start a re-test of all radio types soon. I'm going to need
volunteers, as I only own three radio types, IC781, FT1000MP and TS940.
- Ken K1EA
-----Original Message-----
From: ct-user-admin@contesting.com [mailto:ct-user-admin@contesting.com]
On Behalf Of Warren J. Walsh
Sent: Tuesday, February 26, 2002 3:18 PM
To: ct-user@contesting.com
Subject: Re: Fw: [ct-user] Band "pre-set" in CT V9
At 13:54 2/26/02 -0500, Ed Parish K1EP wrote:
>At 06:43 PM 2/26/2002 +0000, N6RMJ@qnet.com wrote:
> >well if i am using it for a vhf contest, i need each computor to
start
> on the
> >band it is dedicated to 6m/2m/22/432
> >
> >> out of curiosity, what band would you want it to start on...
>
>Remember, it is only for the very first QSO. When you restart CT, it
will
>restart on the band that you were on before. You could always put in a
>dummy QSO (like your own call) which could be taken out later with
>fix_mine.exe. On VHF contests, the default is usually 2M.
I'd like to which version does this. None of the 9.X versions I've used
for HF or VHF do this. For HF contests CT restarts on 20M and for VHF
contests it restarts on 2M. Even after entering QSO's!
- Warren - K2BM
_______________________________________________
ct-user mailing list
ct-user@contesting.com
ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
http://lists.contesting.com/mailman/listinfo/ct-user
|