CT-User
[Top] [All Lists]

[ct-user] Back to orig freq...how?

To: <ct-user@contesting.com>
Subject: [ct-user] Back to orig freq...how?
From: n5nj@gte.net (Bob Naumann - N5NJ)
Date: Fri, 15 Feb 2002 06:50:47 -0600
Apparently the function of Alt-F4 has indeed changed in the latest versions
to be a toggle between run frequency  and the last spot selected via either
Ctrl-> or Alt->.

I'm still using older versions in multi-op situations and have not seen the
new behavior.

NJ


----- Original Message -----
From: "Bob Naumann - N5NJ" <n5nj@gte.net>
To: <ct-user@contesting.com>
Sent: Friday, February 15, 2002 6:30 AM
Subject: Re: [ct-user] Back to orig freq...how?


> Alt-F4 still does go to the last spot - but, with the spots coming so fast
> and furious, the last spot is probably not the one you want any more!
It's
> the last packet spot received - not necessarily the one you need and were
> alerted to along the bottom of the screen.
>
> Ctrl-> is easy to use with a bit of practice.  You must remember to hit
> escape to get the cursor back to the command line after scrolling around
> over there, or you could end up on some frequency you didn't want to go
to.
>
> I find the ability to control what shows in that window very useful -
> especially late in the contest.  I usually start with mults for the band
I'm
> on, then qsos that band, then mults all bands, then qsos all bands near
the
> end.
>
> Since there are so many ways to change your frequency now, the use of
Alt-F5
> before you do anything is mandatory if you expect to be able return to
> whatever your run frequency "is".
>
> NJ
>
>
> ----- Original Message -----
> From: "alsopb" <alsopb@gloryroad.net>
> To: <jjreisert@alum.mit.edu>
> Cc: "Jim White, K4OJ" <k4oj@tampabay.rr.com>; <ct-user@contesting.com>
> Sent: Friday, February 15, 2002 6:11 AM
> Subject: Re: [ct-user] Back to orig freq...how?
>
>
> > Jim,
> >
> > What you say is how it used to work pre version 9.  Many of the 9.x
> > version are broken in this regard and the only reliable way to grab a
> > spot is via CTRL->, scroll up and then hit enter.  ALT-F4 does not do
> > it reliably, if at all.
> >
> > I've complained about this being broken many times.  However, there
> > was complete denial of it.  Not only was their denial but I was
> > subjected to  a lecture on how this was the "wrong way" to get spots.
> > The CTRL -> way was deems the "correct" way. I don't agree that CTRL
> > -> is the correct way for the most recent spot.  It is too many
> > keystrokes.
> >
> > I haven't upgraded to the newest version yet.  Perhaps it does work
> > there.
> >
> > 73 de Brian/K3KO
> >
> > Jim Reisert wrote:
> > >
> > > --- "Jim White, K4OJ" <k4oj@tampabay.rr.com> wrote:
> > >
> > > > after using the arrow to get over into the band map for a needed
mult
> what
> > > > is the command to return the rig to the previous "run" frequency?
> > >
> > > ALT-F4.  Think of it as a toggle:
> > >
> > >   ALT-F4 grabs the most recent spot and goes there.
> > >   ALT-F4 returns you to your run freq when you work the spot.
> > >
> > > It's a good idea to do an ALT-F5 first (to say, "This is my run freq")
> before
> > > the first ALT-F4, otherwise if you're daisy-chaining spots together,
> sometimes
> > > the last ALT-F4 will return you to one of the spot frequencies, rather
> than
> > > your original run frequency.
> > >
> > > - Jim
> > >
> > > =====
> > > Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
> > > USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Send FREE Valentine eCards with Yahoo! Greetings!
> > > http://greetings.yahoo.com
> > > _______________________________________________
> > > ct-user mailing list
> > > ct-user@contesting.com
> > > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > > http://lists.contesting.com/mailman/listinfo/ct-user
> > _______________________________________________
> > ct-user mailing list
> > ct-user@contesting.com
> > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user
>
> _______________________________________________
> ct-user mailing list
> ct-user@contesting.com
> ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user
>


<Prev in Thread] Current Thread [Next in Thread>