Try your favorite contest. I do almost all my debugging in the Windows
version because I have better tools under WIN 2000. You should be able
to load and run your old DOS logs using the Windows version.
When I'm done, I compile as DOS program and test again on a DOS machine.
- Ken
-----Original Message-----
From: ct-user-admin@contesting.com [mailto:ct-user-admin@contesting.com]
On Behalf Of Michael Brown
Sent: Thursday, August 09, 2001 2:29 PM
To: Steve Baron - KB3MM
Cc: 'Ct-User@Contesting. Com'
Subject: Re: [CT-User] Win2000Pro
No keying, just plain logging q's. No external devices connected.
Jim just requested someone try the Windows version of CT and
I just logged over 100 fake q's with no problems what so ever.
This was with CQWW.
I'm going to check with Jim and see what other tests I could try.
Mike K9MI
----- Original Message -----
From: "Steve Baron - KB3MM" <SteveBaron@starlinx.com>
To: "Michael Brown" <k9mi@home.com>
Sent: Thursday, August 09, 2001 12:49 PM
Subject: Re: [CT-User] Win2000Pro
> Were you actually keying rig ? LPT port ? COM ?
> ----- Original Message -----
> From: "Michael Brown" <k9mi@home.com>
> To: "William B. Bridges" <w6fa@caltech.edu>; <CT-User@contesting.com>
> Sent: August 09, 2001 17:13
> Subject: Re: [CT-User] Win2000Pro
>
>
> > Just for kicks I installed CT on my Win2k machine. One problem
> > was the clock runs behind in CT. Also, after about 45 fake q's
> > logged, it completely locked up. I would not plan on using CT
> > with Win2k unless you come up with a dualboot system, or some
> > of the guys were talking about using boot disks. The dual boot
> > will work. Don't know about the boot disk they talked about
> > as I haven't been down that road. But, I would say don't plan
> > on using CT with Win 2k, wheather you use any external devices
> > or not. My advice, if you don't want to modify your Win 2k is
> > to pick up maybe an old 486 or older Pentium just for logging
> > and install Dos 6.22 only on it. That's what I do with my P 120.
> >
> > Mike K9MI
> >
> >
> > ----- Original Message -----
> > From: "William B. Bridges" <w6fa@caltech.edu>
> > To: <CT-User@contesting.com>
> > Sent: Thursday, August 09, 2001 10:09 AM
> > Subject: [CT-User] Win2000Pro
> >
> >
> > > I'm not sure I followed the recent flurry of e-mail re: using CT
with
> > > Win2000Pro. I will soon change my operating system to Win2000Pro,
and
> > > would like to continue using CT. I am not a "power user" and have
no
> COM
> > > port connections to my rig. Can I continue to run CT in this
fashion
> with
> > > the MSDOS emulation in Win2000Pro, or will it choke up? I have
simply
> run
> > > CT in the past with the MSDOS emulations in Win3.1, Win95, and
Win98SE,
> > > without thinking about it. Is there something new and different
about
> > > Win2000Pro? Has Bill Gates finally cracked down on MSDOS users?
> > >
> > > 73 Bill, W6FA
> > >
> > > w6fa@caltech.edu
> > >
> > >
> > > _______________________________________________
> > > CT-User mailing list
> > > CT-User@contesting.com
> > > CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> > > http://lists.contesting.com/mailman/listinfo/ct-user
> >
> > _______________________________________________
> > ct-user mailing list
> > ct-user@contesting.com
> > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user
> >
> >
>
>
_______________________________________________
ct-user mailing list
ct-user@contesting.com
ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
http://lists.contesting.com/mailman/listinfo/ct-user
|