Try doing SETUP from inside CT. I find that this will restart an
apparently "stalled" connection to a radio.
Also, make sure you're not selecting 'radio 2' by mistake.
The newer versions require Alt-period (Alt-.) to switch radios, but
while monkeying around with the bandmap toggle, Alt-Comma (Alt-,) you
may be hitting Alt-. by mistake.
73,
Robert E. Naumann
N5NJ / V26O
N5NJ@arrl.net
www.qsl.net/n5nj
Plano, TX USA
ex KR2J, V26RN, W6V, WA2OVE
----- Original Message -----
From: "alsopb" <alsopb@gloryroad.net>
To: <ct-user@contesting.com>
Sent: Tuesday, November 28, 2000 12:23
Subject: [ct-user] BANDMAP #$@!
>
> v9.52
>
> I sure wish there was some way of disabling the bandmap. ALT = does
> not do this. Band map functions are flakey at best anyhow here.
>
> Getting there accidentally messed up the spot window capture
ability.
> After exiting the bandmap, you could see spots in the announce
window,
> grab them but the rig (TS850) freq would not change to spot freq.
>
> The only remedy was to restart CT and loose the accumulated spots.
>
> This happened at least 30 times this contest and so many times in
> previous contests that I lost count.
>
> Something other than alt -> to trigger bandmap it might help a lot.
>
> 73 de Brian/K3KO
>
> --
> WWW: http://www.k1ea.com/
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> Problems: owner-ct-user@contesting.com
>
>
--
WWW: http://www.k1ea.com/
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
Problems: owner-ct-user@contesting.com
|