Am I the only one still using a DRSI packet card for contesting?
To use the DRSI card, you have to do the following steps:
1) start tnctsr-s
2) open CT and set all the proper commands in the setup.
3) go thru the setup screen (com1 is network, com2 is rig control)
4) start ct.
5) alt-o to get the packet screen, alt-t to go to the xmit window.
6) hit escape key s1 (your see *s1)
7) ct says channel not connected.
8) hit escape c k1xx and you should send a connect cmd.
HOWEVER, I don't get the *c k1xx and tnctsr-s is treating the line as text,
not as a command. On page 6-2 of the DRSI manual, Andy references the
WA8DED commands and the fact that the commands are proceeded by the escape
character.
can anyone shed some light on what I may be doing wrong?
Thanks and 73.
73 Craig Clark W1JCC
Radio Bookstore & Radioware
PO Box 209
47 Fitzgerald Rd
Rindge NH 03461
Orders: 800 457 7373 - 603 899 6957
10am- 6pm EST
Fax: 603 899 6826
24 hours, 7 days per week
email: nx1g@top.monad.net
radware@radio-ware.com
sites: http://www.radio-ware.com
http://www.radiobooks.com
--
WWW: http://www.k1ea.com/
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
Problems: owner-ct-user@contesting.com
|