I should add that we were networked through ethernet cards. We had about 8 to
10
computers netted. We couldn't take time to troubleshoot this--we just yanked
the
ethernet wires from the computer and ran without a network.
"Roland A. Anders" wrote:
> We had same problem at W3AO. Had to yank the network ten minutes into the
> FD.
>
> Potbellyc@aol.com wrote:
>
> > Had trouble with the software today. (9.50.001) We used it 2 weeks ago for
> > the VHF contest with no problems at all. Today, we used fiber modems, with
> > only 2 connectors(not full handshaking), and this had worked OK last year
> > with 9.4x... However, today, when we typed in a call, but didn't yet move
> > fields (or hadn't typed in the full call yet) and two contacts were logged
> > by
> > other stations on the network, the call(or partial call) disappeared.
> >
> > No two stations have the same ID, the multi.cfg is identical, the latest
> > fd.dat and sec.dat are on all machines. We found this happened with ANY two
> > machines connected.
> >
> > Any suggestions?
> > 73,
> > Joe WB2VVS
> >
> > --
> > WWW: http://www.k1ea.com/
> > Submissions: ct-user@contesting.com
> > Administrative requests: ct-user-REQUEST@contesting.com
> > Problems: owner-ct-user@contesting.com
>
> --
> WWW: http://www.k1ea.com/
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> Problems: owner-ct-user@contesting.com
--
WWW: http://www.k1ea.com/
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
Problems: owner-ct-user@contesting.com
|