I use a lap top and just set it to GMT. Point your mouse arrow to the
time read out in the lower right corner of your screen and double
click and the time/date window will open. Set the time zone to GMT:
Casablanca, Monrovia, NOT to GMT: London. Reason is London uses Std
time and DST, Casablanca and Monrovia don't switch to/from DST. Then
adjust the time slot and calendar for the current GMT time and date.
Good luck, 73, Alan, K6ACZ.
Curt wrote:
>
> Thanks for reading,
>
> Funny we should get Herb's message about Daylight Savings Time just when
> my friends PC crashed.
>
> He (we) are tryng to get CT 945 for windoze running and all seems to be
> ok, except setting the time. When the program is executed all seems
> well, except the time is neither local or GMT. Naturally being windows
> based the settz command won't do the trick on the config.sys and the
> command settime in CT tells you to set it through windows.
>
> We are on EDT currently, but CT shows the time as 3 hours ahead of local
> and one hour behind GMT.
>
> Any suggestions or help on this would be much appreciated. We need all
> the luck we can get.
>
> TNX in advance.
>
> Curt KA2SLC
>
> --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.k1ea.com/
> Questions: owner-ct-user@contesting.com
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.k1ea.com/
Questions: owner-ct-user@contesting.com
|