I have recently purchased a Digi Board .. a PC/8e. I believe that the
procedure to use the digi is
1 - load the Digi Driver .. XIDOS5.SYS
2 - load the CT supplied TSR - Digi.exe -I15 ( my IRQ is 15.. but loads much
like the COMTSRs )
3 - start CT with the -digi suffix
However, I don't know how to get the xidos5.sys to load using Windoze 95 in
the DOS mode.. can anyone help>?
Thanks de joe
Shou
David Robbins wrote:
> you also need comdigi to load instead of the comtsr's. and note, you
> can not use the normal com ports when you use the digiboard with ct.
>
> Dave Franks wrote:
> >
> > I have an 8 port PCI digi board, which I plan to use with CT.
> > Is simply using the -DIGI option on the command line sufficient for CT
> > to find and recognize and use the board, or will I need additional
> > drivers and special versions of COMTSR ?
> >
> > I am not in a position to try it for myself, otherwise I would <G>.
> >
> > Thanks in advance.
> >
> > Dave K2XR@zajil.net
> >
> > --
> > Submissions: ct-user@contesting.com
> > Administrative requests: ct-user-REQUEST@contesting.com
> > WWW: http://www.contesting.com/ct/
> > Questions: owner-ct-user@contesting.com
>
> --
> David Robbins K1TTT (ex KY1H)
> k1ttt@berkshire.net or robbins@berkshire.net
> http://www.berkshire.net/~robbins/k1ttt.html
>
> --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|