I used 9.39, Icom IC-729 (as an IC-737) with no problems other than if I
used CT to change bands the radio would switch from VFO A to VFO B and Back
to VFO A again. Albeit on the right freq. but it was almost instantaneous.
The only other problem I saw, and I thought I may have caused it, was when I
went back to a station in the band map. The first time I did this was right
after changing bands with the radio, I found a spot and ctrl-enter to put it
in the band map then tried to work another station up the band, didn't get
him so I came back to the spot and worked it,but CT logged it on the
previous band. Other than that, everything seemed to work ok.
73 de Bob
n2xr
>
>i have noticed that after upgrading from 9.27 to 9.38 the interface
>between the computer and radio seems to hang up more often.
>unfortunately this has coincided with upgrades of radios from ts-940's
>to ft-1000mp's so i'm not sure if it is a new problem or something that
>is being worked on. we also had a ft-1000 (not d or mp) that would hang
>up the interface then crash the computer. i think each of the machines
>with ft-1000mp's had to be rebooted 3 or 4 times, but i also had to
>reboot one machine running a ts-870, the ft-1000 crashed 3 or 4 times
>one night... any comments? is this normal for these radios with 9.38?
>is 9.39 any better??
>
>
>--
>David Robbins K1TTT (ex KY1H)
>k1ttt@berkshire.net or robbins@berkshire.net
>http://www.berkshire.net/~robbins/k1ttt.html
>
>--
>Submissions: ct-user@contesting.com
>Administrative requests: ct-user-REQUEST@contesting.com
>WWW: http://www.contesting.com/ct/
>Questions: owner-ct-user@contesting.com
>
>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|