Used V9.39 successfully with a TS450/Keyer/Antenna Switching/1 radio
successfully. However, the following anomolies were noted:
1) In the past I had called the radio a TS440. It didn't work. I had to
call it a TS-50.
2) The ALR-R key brought up the keyer speed window on the first press and
then the rate window on the second press.
3) The logic to test for a new mult has some problems. I had a KH6 in
the log but a kh6/w6something was called out as a new mult on the same
band.
4) I guess I will never figure out how to use the band map. It froze at
times requiring a getting out of CT and back in. I gave up on it.
Version 9.39 seemed quite a bit snappier than other versions. I sure
like that. No more radio time-outs.
I simply don't understand the 7 hour problem when converting the BIN
file to other formats. The WRITEARRL command gives the correct time,
the B2R9 gives the correct time. However, a direct conversion by
LOG-EQF of the file has the infamous 7 hour time difference. No matter,
LOG-EQF can convert the ARRL formated file into its format OK.
de Brian/K3KO
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|