4800 E72
and EXPECT to have to do a processor reset to get the CAT to work... it
seems to be required in about half the radios. tell him to bring his
1000MP book if u dont have one, look at the table in the back of the book
about menu settings ( I THINK its FAST-ENTER and power on... but that
might be the one which will dump all the menu settings to default-
typically that much reset is not required to make the cat work, altho in
extreme cases, it is needed.
also the cable is NOT a null modem cable.. a bit unusual db9- F-F cable
good luck
robin critchell, wa6cdr/xz1n
At 10:16 2/18/99 -0500, you wrote:
>
>Need a little help with setting up a ft1000mp with ct 9.39...one of our m-m
>ops is bringing his own radio and has never used it with ct...what is the
>comtsr settings to use? appreciate it...de Rick
>
>--
>Submissions: ct-user@contesting.com
>Administrative requests: ct-user-REQUEST@contesting.com
>WWW: http://www.contesting.com/ct/
>Questions: owner-ct-user@contesting.com
>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|