CT-User
[Top] [All Lists]

[ct-user] Multiple serial ports

To: <ct-user@contesting.com>
Subject: [ct-user] Multiple serial ports
From: Mike McCarthy, W1NR" <w1nr@eecorp.com (Mike McCarthy, W1NR)
Date: Wed, 11 Nov 1998 20:31:22 -0500
SIIG has a 4 port card with 16550 UARTS that can be set to anything from
COM1 through COM8 and any available IRQ.  Got mine at Computer City.
It is set to COM3,4,5 and 6 at IRQ's 9,10,14 and 15.

Mike, W1NR

"Wilkowski, Joseph" wrote:
> 
> [moderator note:  I pointed him to the CT web page, there is a whole
>  page there devoted to serial port cards.  The information may be
>  out-of-date, please send corrections to owner-ct-user@contesting.com]
> 
> Folks, I have seen discussion on this subject in the past and never thought
> to much about it.  But when I seriously went looking for a 4 port serial
> card that had high speed  UARTS I am coming up short.  Who has multiple port
> serial cards that support at least four simultaneous serial connections
> without the com1/com3 com2/com4 interrupt sharing problems.
> 
> Thanks in advance,
> 
> joe k8fc
> 
> --
> Submissions:              ct-user@contesting.com
> Administrative requests:  ct-user-REQUEST@contesting.com
> WWW:                      http://www.contesting.com/ct/
> Questions:                owner-ct-user@contesting.com

-- 
**************** Give Every Man His Dew **************
Michael A. McCarthy, President
Everest Engineering Corporation, Consultants
4 Barnes Circle, Marlborough, MA 01752
(508) 460-6737, FAX (508) 460-7951
mailto:w1nr@eecorp.com
******************************************************

--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>