Make particularly sure that you have installed direct connection. This is
not a default Windows install component and you will have to load it from
the Settings/Control Panel/Add Remove Programs Icon. Select communciations
and select direct connection.
This had me going once for about a month...Daaaaa.
Tony, VE3RZ
At 11:43 AM 13/10/98 +0000, John K9UWA wrote:
>
>I had a two computer setup..one 486 / 33 mhz and a 486 / 100 mhz. One
>was hooked to an IC-765 and DRSI internal TNC ....the other connected
>by Null Modem cable to a 2nd IC-765. I replaced the 486 / 100 with a
>Pentium 166 mhz running Windows 95. Currently following instructions
>from another CT posting computer boots to a "CT" configuration and the
>radio works fine.....however I can't seem to get the Null Modem link
>between the 2 computers to work....no packet spots to 2nd computer and
>no Logging between them....anyone have similar setup that could send me
>copies or whatever setups and bat files or anything else that will make
>it work....Would appreciate all the help I can get!!
>Thanks
>John K9UWA
>ps: what about ether net cards?? Will they work??
>John Goller, K9UWA & Jean Goller, N9PXF
>Antique Radio Restorations
>k9uwa@cris.com
>
>http://www.concentric.com/~k9uwa/
>
>--
>Submissions: ct-user@contesting.com
>Administrative requests: ct-user-REQUEST@contesting.com
>WWW: http://www.contesting.com/ct/
>Questions: owner-ct-user@contesting.com
>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|