I have not yet tested CW keying with the LPT port. Do I understand correctly
that I will have to rewire the cables that worked with version 8? Jeesh! I
hope there was a good reason for that!
Bill N7DZ
Ken Wolff wrote:
> In versions prior to 9.3x pin 1 (strobe) does the keying, while pin 17
> (select) is held high to provide bias to the transistor. In versions 9.3x
> and above, strobe is held low, while select does the keying. I suspect you
> are using a slightly different circuit than the one in the CT manual.
>
> 73, Ken K1EA
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|