Hello all,
We used 9.37 in field day and we had a couple of problems. Still had
a ball!!!
1 - When you change bands using frequency buttons on the radio CT would
not
follow the band change. Even if you entered a QSO and logged it CT
would log it to the wrong band. The only way to have CT follow the
band
change is to type in the frequency into CT. Then the radio would
go to the
new bad along with CT... This only happens in the FD contest of
9.37.
I tried it using all the other contests and CT follows the radio
band changes OK.
We were using computer controlled Kenwood TS-940S.
2 - Getting constant radio timeout message. This happens with all
contests, not
just FD... (Still using Kenwood TS-940S).
3 - During FD when one rig, in a multi TX set up, logs a QSO and the
next rig
logs a QSO on a different band you get an illegal band change
message.
That's it for us... Even with these problems we had a great time...
73, Ted K2QMF
_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|