I want to thank all who replied to my CT/WIN95/mouse problem. I fell into
the right answer by accident. My task was to close out WIN95 to dos and
run CT with my mouse. My .bat file that I used for CT came from another
machine. The first steps in this file were to go into the mouse sub
directory, activate mouse.com and return to the CT directory to run CT.
Apparently the way WIN95 is set up the mouse steps in the .bat file were
unnecessary, as once I remmed them out of the file, the mouse worked in CT.
Thanks again for your responses.
Ron ND5S
----------
> From: CT-User Digest
> To: ct-user-digest@contesting.com
> Subject: CT-User Digest V1 #276
To: <ct-user@contesting.com>
> Date: Thursday, May 28, 1998 11:45 PM
>
>
> CT-User Digest Thursday, May 28 1998 Volume 01 : Number
276
>
>
>
> In this issue:
>
> [ct-user] FT-1000MP and CT problems.
> Re: [ct-user] FT-1000MP and CT problems.
> [ct-user] ft-1000mp comm problems
> Re: [ct-user] FT-1000MP and CT problems.
> Re: [ct-user] FT-1000MP and CT problems.
> Re: [ct-user] ft-1000mp comm problems
> [ct-user] CW keying problem with 9.37
> [ct-user] Mouse and Win 95
> Re: [ct-user] Mouse and Win 95
>
> See the end of the digest for information about ct-user-digest
>
> ----------------------------------------------------------------------
>
To: <ct-user@contesting.com>
> Date: Thu, 28 May 1998 04:40:29 +0200
> From: "Pawel SP7NMW" <sp7nmw@bonus.com.pl>
> Subject: [ct-user] FT-1000MP and CT problems.
>
> This is a multi-part message in MIME format.
>
> - ------=_NextPart_000_000C_01BD89F2.BD7FC440
> Content-Type: text/plain;
> charset="iso-8859-2"
> Content-Transfer-Encoding: quoted-printable
>
> I need a help with CT and FT-1000MP configuration and changing bands.
> =20
> I can change the bands of my transceiver from the keyboard (alt-F1, =
> alt-F-2) but when I want to log in QSO by ENTER there is: "Out of band! =
> 18075300" information on the bottom of the screen (I was on the 21.005).
=
> I tried several times and still the same.
> =20
> Let me show the steps I make with computer and CT:
> =20
> 1. First I turn on FT-1000 MP.
> 2. Next start my computer with Win 95, when it is loaded I close it and =
> start DOS.
> 3. I load TSR and start CT, make all configurations. Changing bands =
> works, but I can't log QSOs.
> =20
> I have checked the "com" configuration and have the following ports:
> a. com 1 - irq 10 (I switch it manually from 4 - it was conflict with =
> com 3)
> b. com 2 - irq 05 (it was 3 and conflict with com 4)
> c. com 3 - irq 4 (I can not change it)
> d. com 4 - irq 3
> =20
> The same results I have if I start my computer without Win 95 by =
> pressing F8 and do not load Win 95.
> I also tried with computer configured with the same IRQ on two ports, as
=
> was at the original configuration of my computer.
> =20
> I hope you will help.
> =20
> See you in the WPX.
> =20
> Paul, SP7NMW
>
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
To: <ct-user@contesting.com>
> Date: Thu, 28 May 1998 15:59:06 -0400 (EDT)
> From: w2xx@cloud9.net
> Subject: Re: [ct-user] FT-1000MP and CT problems.
>
> Hi Paul:
>
> CT reacts badly with the FT-1000MP *IF* the RIT is on.
>
> Check to see that your RIT is off and try again...
>
> 73, J.P. W2XX
>
> ================================================================
> J.P. Kleinhaus, W2XX (fdba AA2DU)
> E-mail: w2xx@cloud9.net
>
> As we say in the software business: "You are hosed."
> ================================================================
>
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
To: <ct-user@contesting.com>
> Date: Thu, 28 May 1998 13:40:04 -0700
> From: wb6tza@compuall.net
> Subject: [ct-user] ft-1000mp comm problems
>
> re the loss of meaningful comm ft-1000mp and CT
>
> We found that the comm errors occurred with straight dos, and no tnc or
> network involved, used CT-9.27, and laptops, so the AC power/groundloops
> wasn't an issue. The evidence was that the 1000 itself was the problem..
3
> of the 4 radios required a cpu reset on arrival in XZ, and one of those
> required another reset when we returned. Seems probable the NV ram can
get
> some junk stored, confusing the issue.
>
> suggest you reset the cpu in the 1000 and try again- see the manual, you
> will have to re-load whatever you have changed in the menus.
>
> this is much like ctl/alt/del in a PC - it re-reads most stuff and seems
> to run better
>
>
> robin critchell, wa6cdr, xz1n, n6ll
>
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
To: <ct-user@contesting.com>
> Date: Thu, 28 May 1998 22:53:48 +0000
> From: David Robbins <k1ttt@berkshire.net>
> Subject: Re: [ct-user] FT-1000MP and CT problems.
>
> another thing to check is that you aren't using a memory to tune with.
> ct will only read the vfo frequencies it will not detect that you
> are in mtune mode. band changes will still work, but ct will read
> the vfo frequency even after it changes the band in the memory mode.
>
> Pawel SP7NMW wrote:
> >
> > I need a help with CT and FT-1000MP configuration and changing bands.
> >
> > I can change the bands of my transceiver from the keyboard (alt-F1,
alt-F-2) but when I want to log in QSO by ENTER there is: "Out of band!
18075300" information on the bottom of the screen (I was on the 21.005). I
tried several times and still the same.
> >
> > Let me show the steps I make with computer and CT:
> >
> > 1. First I turn on FT-1000 MP.
> > 2. Next start my computer with Win 95, when it is loaded I close it and
start DOS.
> > 3. I load TSR and start CT, make all configurations. Changing bands
works, but I can't log QSOs.
> >
> > I have checked the "com" configuration and have the following ports:
> > a. com 1 - irq 10 (I switch it manually from 4 - it was conflict with
com 3)
> > b. com 2 - irq 05 (it was 3 and conflict with com 4)
> > c. com 3 - irq 4 (I can not change it)
> > d. com 4 - irq 3
> >
> > The same results I have if I start my computer without Win 95 by
pressing F8 and do not load Win 95.
> > I also tried with computer configured with the same IRQ on two ports,
as was at the original configuration of my computer.
> >
> > I hope you will help.
> >
> > See you in the WPX.
> >
> > Paul, SP7NMW
> >
> > --
> > Submissions: ct-user@contesting.com
> > Administrative requests: ct-user-REQUEST@contesting.com
> > WWW: http://www.contesting.com/ct/
> > Questions: owner-ct-user@contesting.com
>
> - --
> David Robbins K1TTT (ex KY1H)
> k1ttt@berkshire.net or robbins@berkshire.net
> http://www.berkshire.net/~robbins/k1ttt.html
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
To: <ct-user@contesting.com>
> Date: Thu, 28 May 1998 23:29:18 +0100
> From: "Tyler Stewart" <k3mm@erols.com>
> Subject: Re: [ct-user] FT-1000MP and CT problems.
>
> That's a pretty strange COM port assignment, but it should work if
everything
> is configured properly.
>
> Make sure you are using version 9.27 or later. The MP interface is
broken on
> earlier versions. In addition, make sure your clarifier is turned off
(or
> cleared) unless you are running version 9.32 or later.
>
> 73, Ty K3MM
>
> - -----Original Message-----
> From: Pawel SP7NMW <sp7nmw@bonus.com.pl>
> To: ct_user <ct-user@contesting.com>
To: <ct-user@contesting.com>
> Date: Thursday, May 28, 1998 20:56
> Subject: [ct-user] FT-1000MP and CT problems.
>
>
> I need a help with CT and FT-1000MP configuration and changing bands.
>
> I can change the bands of my transceiver from the keyboard (alt-F1,
alt-F-2)
> but when I want to log in QSO by ENTER there is: "Out of band! 18075300"
> information on the bottom of the screen (I was on the 21.005). I tried
several
> times and still the same.
>
> Let me show the steps I make with computer and CT:
>
> 1. First I turn on FT-1000 MP.
> 2. Next start my computer with Win 95, when it is loaded I close it and
start
> DOS.
> 3. I load TSR and start CT, make all configurations. Changing bands
works, but
> I can't log QSOs.
>
> I have checked the "com" configuration and have the following ports:
> a. com 1 - irq 10 (I switch it manually from 4 - it was conflict with com
3)
> b. com 2 - irq 05 (it was 3 and conflict with com 4)
> c. com 3 - irq 4 (I can not change it)
> d. com 4 - irq 3
>
> The same results I have if I start my computer without Win 95 by pressing
F8
> and do not load Win 95.
> I also tried with computer configured with the same IRQ on two ports, as
was
> at the original configuration of my computer.
>
> I hope you will help.
>
> See you in the WPX.
>
> Paul, SP7NMW
>
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
To: <ct-user@contesting.com>
> Date: Thu, 28 May 1998 23:31:43 +0100
> From: "Tyler Stewart" <k3mm@erols.com>
> Subject: Re: [ct-user] ft-1000mp comm problems
>
> Make sure that you dont have your dial set to MTUNE rather than VFO. It
wont
> work unless you do, and when you do a hard reset guess what? It comes
up in
> VFO mode and is magically fixed! hi!
>
> 73, Ty K3MM
>
> - -----Original Message-----
> From: wb6tza@compuall.net <wb6tza@compuall.net>
> To: ct-user@contesting.com <ct-user@contesting.com>
To: <ct-user@contesting.com>
> Date: Thursday, May 28, 1998 21:40
> Subject: [ct-user] ft-1000mp comm problems
>
>
> >re the loss of meaningful comm ft-1000mp and CT
> >
> >We found that the comm errors occurred with straight dos, and no tnc or
> >network involved, used CT-9.27, and laptops, so the AC power/groundloops
> >wasn't an issue. The evidence was that the 1000 itself was the problem..
3
> >of the 4 radios required a cpu reset on arrival in XZ, and one of those
> >required another reset when we returned. Seems probable the NV ram can
get
> >some junk stored, confusing the issue.
> >
> >suggest you reset the cpu in the 1000 and try again- see the manual,
you
> >will have to re-load whatever you have changed in the menus.
> >
> >this is much like ctl/alt/del in a PC - it re-reads most stuff and
seems
> >to run better
> >
> >
> >robin critchell, wa6cdr, xz1n, n6ll
> >
> >
> >--
> >Submissions: ct-user@contesting.com
> >Administrative requests: ct-user-REQUEST@contesting.com
> >WWW: http://www.contesting.com/ct/
> >Questions: owner-ct-user@contesting.com
> >
>
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
To: <ct-user@contesting.com>
> Date: Fri, 29 May 1998 00:30:16 +0100
> From: Keith Beebe <kbeebe@epix.net>
> Subject: [ct-user] CW keying problem with 9.37
>
> Just downloaded Version 9.37. I'm now experiencing a CW keying "timing"
> problem that was not evident in previous versions. I use parallel port
> keying with LPT1.
>
> Anyone else having the same problem?
>
> Keith Beebe W3KB
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
To: <ct-user@contesting.com>
> Date: Thu, 28 May 1998 21:33:44 -0400
> From: "Ron St.Laurent" <nd5s@ix.netcom.com>
> Subject: [ct-user] Mouse and Win 95
>
> I loaded CT in a DOS shell within Windows 95. How do I get the mouse to
> work in this
> environment? Win 95 apparently controls all functions of the mouse. I
> can't find a
> mouse program inside the Win 95 directories. I tried loading an older
> version of
> mouse.com in a new mouse directory. The program seems to load okay but
the
> mouse still
> will not function. This may be an old problem for some, but it has me
> stymied. HELP!!
>
> Ron ND5S
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
To: <ct-user@contesting.com>
> Date: Thu, 28 May 1998 21:49:14 -0500
> From: "Larry Johnson" <k5yf@wt.net>
> Subject: Re: [ct-user] Mouse and Win 95
>
> If you set it up as an icon on the desktop, right click that icon. If you
> didn't, what you can do is to set up a bat file to run it with the
command
> on the command line you want, and make that an icon on the desktop,i.e.,
a
> short cut to that bat file. Then right click the icon, select Properties,
> select Misc, and then click Exclusive Mode on the mouse option.
>
>
> Larry Johnson, K5YF
> Houston, Texas USA
> e-mail: k5yf@wt.net
>
>
>
> - -----Original Message-----
> From: Ron St.Laurent <nd5s@ix.netcom.com>
> To: ct-user@contesting.com <ct-user@contesting.com>
To: <ct-user@contesting.com>
> Date: Thursday, May 28, 1998 20:34
> Subject: [ct-user] Mouse and Win 95
>
>
> >I loaded CT in a DOS shell within Windows 95. How do I get the mouse to
> >work in this
> >environment? Win 95 apparently controls all functions of the mouse. I
> >can't find a
> >mouse program inside the Win 95 directories. I tried loading an older
> >version of
> >mouse.com in a new mouse directory. The program seems to load okay but
the
> >mouse still
> >will not function. This may be an old problem for some, but it has me
> >stymied. HELP!!
> >
> >Ron ND5S
> >
> >--
> >Submissions: ct-user@contesting.com
> >Administrative requests: ct-user-REQUEST@contesting.com
> >WWW: http://www.contesting.com/ct/
> >Questions: owner-ct-user@contesting.com
> >
>
>
> - --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/ct/
> Questions: owner-ct-user@contesting.com
>
> ------------------------------
>
> End of CT-User Digest V1 #276
> *****************************
>
>
> --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-digest-REQUEST@contesting.com
> WWW: http://ve7tcp.ampr.org/Software/ct
> Questions: owner-ct-user-digest@contesting.com
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|