This is a multi-part message in MIME format.
------=_NextPart_000_001F_01BD7ACE.653B2AF0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Ok, I have connected the lpt port through the npn and the 1k resistor =
and got CT to send via the radio. When I connect pins 12 & 13 via 10k =
to pin 14 and connect the paddles to pins 12 & 13 and ground to 11, CT =
will not send anything. I know nothing is shorted, everything seems to =
be wired correctly but no signal to the radio. I have tried this with =
9.27, 9.34 and 9.36 with no luck. Any ideas???
73 de Bob
n2xr
------=_NextPart_000_001F_01BD7ACE.653B2AF0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>
<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.2106.6"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>Ok, I have connected the lpt port through the npn =
and the 1k=20
resistor and got CT to send via the radio. When I connect pins 12 =
& 13=20
via 10k to pin 14 and connect the paddles to pins 12 & 13 and ground =
to 11,=20
CT will not send anything. I know nothing is shorted, everything =
seems to=20
be wired correctly but no signal to the radio. I have tried this =
with=20
9.27, 9.34 and 9.36 with no luck. Any ideas???</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>73 de Bob</FONT></DIV>
<DIV><FONT size=3D2>n2xr</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV></BODY></HTML>
------=_NextPart_000_001F_01BD7ACE.653B2AF0--
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|