At 10:50 PM 03/11/97 -0800, Marc Cosemans wrote:
>Hello.....
>
>Just bought a TS850 from a friend of mine,but don't know how to connect
>it with my favorite contest prg CT.
>I use version 9.23....
>
>Thanks Marc
>
>
Load the comtsr program for the serial port you will be using (ie: comtsr
1 for com 1)
Use a baud rate of 4800 -RTS with the COMTSR
Connect the radio to the TTL-RS232 converter (IF-232C). If you don't have
a IF-232 C you can build one. There is a design in the ARRL handbook that
works very well. You just need a MAX232 chip and a couple of caps.
Start CT and select TS-850.
It works fine. I have no problems with Kenwood, and more problems when I
try to use Icom (ie: IC-756)
Good luck...Mike VA3MW
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.contesting.com/ct/
Questions: owner-ct-user@contesting.com
|