Answer to Question #3
Key your radio offf of LPT1 and save the COM POrts for some other
esoteric functions like controlling rig or Packet Cluster.
73, Dennis N6KI
On Wed, 2 Jul 1997 09:25:44 -0400 (EDT) K5PN@aol.com writes:
>#1 Question - my contesting partner and I just both bought ver 9.27
>and used
>them in FD on separate computers (not networked). His recorded and
>displayed
>the information for the Rate Graph....mine never showed that any
>contacts
>were made, zero...I was running probably 50 QSO/hr peak.........His
>computer
>a Pentium, mine a 486....Any ideas what is wrong?
>
>#2 Question - As soon as I start my CT batch file that executes the
>COMTSR1,2,3 tsr programs (and subsequently CT.exe) it keys my radio
>and
>stays that way until I get all the way to the logging screen and hit
>ESC or
>any of the Function keys that will make it stop...........Any ideas
>with
>this?
>
>#3 Question - Ran along making a number of contacts on 20M.....Then I
>switched to 40M to make a contact or two......As soon as I would hit
>ENTER to
>log the 40M contact, CT would log it on 20M and return to 20M for the
>next
>contact....I would change it to 40M again and the situation would
>repeat.....I finally got it to stay by playing around a little but no
>pattern
>was evident as to what would make it stay on the band I selected via
>the ALT
>F1 command..... I was not using any Radio or Rotor or Antenna
>control....Just
>the one COM port output to key my radio......Running direct out of
>DOS...Windows not involved......Suggestions???
>
>
>
>
>--
>Submissions: ct-user@ve7tcp.ampr.org
>Administrative requests: ct-user-REQUEST@ve7tcp.ampr.org
>WWW: http://www.ve7tcp.ampr.org/Software/ct
>Questions: owner-ct-user@ve7tcp.ampr.org
>
--
Submissions: ct-user@ve7tcp.ampr.org
Administrative requests: ct-user-REQUEST@ve7tcp.ampr.org
WWW: http://www.ve7tcp.ampr.org/Software/ct
Questions: owner-ct-user@ve7tcp.ampr.org
|