On Fri, 21 Feb 1997 TOMK89@aol.com wrote:
> Is there anybody around that could give me a better understanding of the
> -LOOP option in CT?
>
> I have these specific questions in mind:
> 1. Does there need to be a complete loop between all stations? (i.e. 1 to 2,
> 2 to 3, 3 to 1).
Yes.
> 2. Without using a null modem cable what pins need to be connected from
> station to station?
Minimally, pins 2,3 and 7 are involved. Pin 7 (signal ground) runs
straight through. Pins 2 and 3 get swapped on each "hop".
Here is a more detailed doc posted some time ago:
=====cut here======
|