> Hi,
>
> This may be an old problem, but I havent been on the CT refelctor for
> a while...
>
> Last night I networked 2 computers together as a M/M for the WPX
> contest using CT 9.26. I had a problem with the serial numbers. The
> next band serial number displayed was fine, but once you logged it,
> the serial number appearing on the screen was not the next band serial
> number, but it was the number of the total logged contacts on all
> bands.
>
> I tried swapping null modem cables, tried going to CT 9.23, tried
> different data rates etc, but the problem still persisted. I did a
> WRITE LOG, and they were logged correctly, so it was a screen only
> problem.
>
> Any ideas out there?
>
> Many Thanks,
>
> Kenny WM2C
>
> ken.silverman@airtouch.com
>
> CU as WM2C M/M from N6RO's QTH
>
>
>
>
>--
>Submissions: ct-user@ve7tcp.ampr.org
>Administrative requests: ct-user-REQUEST@ve7tcp.ampr.org
>WWW: http://www.ve7tcp.ampr.org/Software/ct
>Questions: owner-ct-user@ve7tcp.ampr.org
It's busted, but it writes the logs OK at the end, so the only inconvenience is
not being able to tell the serial number when you scroll back in the log.
I dont remember if the single op/multi computer serial number problem has
been fixed. Anybody answer that one?
73, Tyler KF3P@cais.com
--
Submissions: ct-user@ve7tcp.ampr.org
Administrative requests: ct-user-REQUEST@ve7tcp.ampr.org
WWW: http://www.ve7tcp.ampr.org/Software/ct
Questions: owner-ct-user@ve7tcp.ampr.org
|