Oh, and another:
(aka: Posted the summary a tad before I looked through my entire in-box. HI)
THE ONLY WAY I COULD GET THIS COMBINATION TO WORK WAS TO USE A COMMAND
PROGRAM
(A MACRO) TO SET UP THE TNC BEFORE I START CT, THE SAME WAY I SET UP MY
TSR's
BEFORE STARTING CT. I USE PROCOMM TO SET UP THE TNC PARAMETERS. YOU COULD
USE
ANYTHING AND ELSE AND YOU COULD DO THIS MANUALLY EACH TIME YOU WANT TO RUN
CT.
I CAN'T EXPLAIN EITHER THE PROBLEM OR THE SOLUTION BUT I HAD EXACTLY THE
SAME
SYMPTOMS UNTIL I STUMBLED ON THIS METHOD THAT WORKS FOR ME.
73 JOHN - K2AZ
- - - - - - - - - - - - - -
Hi Glenn,
My PK-88 works fine with CT. You might check your COM port setups.
73. Ken, AB6FO, KWIDELITZ@DELPHI.COM
--
Submissions: ct-user@ve7tcp.ampr.org
Administrative requests: ct-user-REQUEST@ve7tcp.ampr.org
WWW: http://ve7tcp.ampr.org/Lists/ct-user.html
Questions: reisert@ve7tcp.ampr.org
|