I have just purchased CT-9.23 and all functions are working fairly well
except I cannot get CT to key the transmitter in CW using either LPT1 or
LPT2. I am using a 486DX4 100mhz with 16 megs of memory with 4 comports
all with 16550A Uarts and 2 printer ports and I have 2 hard drives a 1.2
G and a 210 meg. I am also using a high speed 32 bit controller card.
the com port keys the cw transmitter just fine but with the radio and
tnc on com 3 and 4 there is a distinct possibility of a conflict if I
use com 2 for the cw keying. I also have a CDRom and sound card installed,
however I have removed the sound card and CDrom and booted the computer
from a bootable disk and the problem is still there no CW keying on the
printer ports however the com 2 works great. Any help with this would
be greatly appreciated.
John R. Moore W5HUQ jrmoore@jax.jaxnet.com
This is a simple sig file
--
Submissions: ct-user@eng.pko.dec.com
Administrative requests: ct-user-REQUEST@eng.pko.dec.com
WWW: http://ve7tcp.ampr.org/mailing-lists/ct-user.html
Questions: reisert@eng.pko.dec.com
|