Below are the LPT pinouts for the CT program (I think):
---------------------------------------------------------
LPT1 Pin Assignments
Pin 2......BAND DATA "A"
Pin 7......BAND DATA "B"
Pin 8......BAND DATA "C"
Pin 9......BAND DATA "D"
Pin 1......CW STROBE
Pin 17.....CW SLCT
Pin 18.....GND
Pin 3......DVK SWITCH #1
Pin 4......DVK SWITCH #2
Pin 5......DVK SWITCH #3
Pin 6......DVK SWITCH #4
Pin 11/25..GND
---------------------------------------------------------
LPT2 Pin Assignments
Pin 2......RADIO 1/2 SELECT
Pin 1......CW STROBE
Pin 17.....CW SLCT
Pin 18.....GND
Pin 3......DVK SWITCH #1
Pin 4......DVK SWITCH #2
Pin 5......DVK SWITCH #3
Pin 6......DVK SWITCH #4
Pin 11/25..GND
---------------------------------------------------------
LPT3 Pin Assignments
Pin 1......CW STROBE
Pin 17.....CW SLCT
Pin 18.....GND
Pin 3......DVK SWITCH #1
Pin 4......DVK SWITCH #2
Pin 5......DVK SWITCH #3
Pin 6......DVK SWITCH #4
Pin 11/25..GND
---------------------------------------------------------
Use the -AC option to get BAND DATA on LPT1 (only) for
use with Top Ten Decoder etc.
Radio 1/2 Select is always on LPT2.
CW Port and DVK Control are subject to software setup to
enable the outputs.
---------------------------------------------------------
Anyone agree or disagree? Please let me know.
73 de Brian
--
Submissions: ct-user@eng.pko.dec.com
Administrative requests: ct-user-request@eng.pko.dec.com
Problems: reisert@eng.pko.dec.com
|