CT-User
[Top] [All Lists]

Problem interfacing with TS-940

To: <ct-user@contesting.com>
Subject: Problem interfacing with TS-940
From: garyk9gs@solaria.sol.net (Gary T. Schwartz)
Date: Sat, 3 Dec 1994 21:35:28 -0600 (CST)
On Sat, 3 Dec 1994 FLUORINE@delphi.com wrote:

> I'm having no luck getting CT (ver9.1 -same symtoms with earlier versions)
> to recognize my 940.  Another program (Ham Windows) has no trouble controll-
> ing the radio.  I'm using the Kenwood interface.  Both COMTSR4 and SETUP
> are set for com4,4800 baud, 8n1.  Whenever I start up CT with my 940 as
> radio 1, I get the message "Kenwood radio not initialized" followed by
> "Kenwood radio timeout" at which point CT freezes and the computer has to
> be re-booted.  Any ideas?  Thanks.  John Hill K2YY
******************************************************************************
I'm not sure about 940's but my 850 requires the COM port be setup for
4800 Baud,8N2....NOT 8N1.  Also, do you have the address set correctly??

Good Luck!

Gary K9GS
garyk9gs@solaria.sol.net






<Prev in Thread] Current Thread [Next in Thread>