CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] 1/4 6061 tubing

To: "cq-contest@contesting.com" <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] 1/4 6061 tubing
From: Drew Vonada-Smith <drew@whisperingwoods.org>
Date: Sat, 3 Jan 2026 18:10:42 +0000
List-post: <mailto:cq-contest@contesting.com>
All,

Tim was of course right and I was wrong - DXE did NOT sell 1/4 inch OD Al 
tubing previously.  I apparently got mine somewhere else and forgot about it.  
I was surprised since they use it internally there in a few places.  Many kudos 
and thanks to Tim for offering to look into this and have DXE provide it.  And 
for not telling me I was an idiot...lol.

Re other's comments:

1) Yes, there are plenty of other sources.  If you price them with antenna 
quantities in mind, you'll find that none are affordable.  At present, DXE is 
the lone wolf out there not robbing us blind for tubing.  It's expensive stuff 
even at fair pricing.

2) Yes alloy chemistry matters, but 6061 and 6063 designations (and the heat 
treatment 6061/3-xxx designations) are ubiquitous and tell the tale adequately.

3) Yes, 1/4 in is small, but there are many valid applications for it.  Tips of 
small yagis, verticals, RX arrays.  It's used plenty in commercial products.

Again, thanks Tim.  I was hoping you'd read it here.

73, Drew K3PA

----------------------------------------------------------------------

Message: 1
Date: Fri, 2 Jan 2026 16:09:33 +0000
From: Drew Vonada-Smith <drew@whisperingwoods.org>
To: "cq-contest@contesting.com" <cq-contest@contesting.com>
Subject: [CQ-Contest] 1/4 inch tubing
Message-ID:
        
<LV9PR18MB9276370E62E386DF1A7D64B3A4C8BBA@LV9PR18MB927637.namprd18.prod.outlook.com>
        
Content-Type: text/plain; charset="us-ascii"

Contesters,

Has anyone else noticed that DXE no longer lists 0.25 in tubing on its site?  
Obviously, they need that size to build/maintain almost any Yagi or vertical 
they sell or make.  I called and they assured me they don't carry it anymore, 
despite it being part of many things they still sell.  Including elements for 
the RX circle array I am getting ready to build using their preamps.  I have 
yet to find an alternate source at less than 3x the price.   This has got to be 
a mistake right?

73, Drew K3PA




------------------------------
******************************************

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [CQ-Contest] 1/4 6061 tubing, Drew Vonada-Smith <=