got it working Rich! I finally found the little drop down box from
EXTFSK on the windows task bar and was able to set the right port and
all now working! Thanks for all your help! 73's Cort K4WI
Rich wrote on 9/24/2025 3:34 PM:
I think at this point, I would just work with the standalone MMTTY
program and get that working. Forget WL for the moment.
I have no more ideas as I am doing exactly what you are doing and it
works fine.
You are using the STANDARD FTDX101MP port correct?
Also in the WL RTTYRite -TU TYPE window make sure you have XMMT.ocx
Rich
On 9/24/2025 4:00 PM, Courtney Judd wrote:
those are all there and I select EXTFSK64 and the issue remains the
same. I think it is a port issue but since the drop down menu cant be
seen no way to select the right port.... but then again what do I
know...lol
Rich wrote on 9/24/2025 2:23 PM:
Do you see these files EXTFSK64.FSK, EXTFSK.DDL, EXTFSK.INI,
EXTFSK64.INI in your MMTTY folder?
If so, then in MMTTY SETUP goto:
TX - PTT&FSK - Port - select EXTFSK64
Rich
On 9/24/2025 3:15 PM, Courtney Judd wrote:
it is all there BUT the little drop down window does not appear
either under EXTFSK or EXTFSK64 so I think that is where the
problem is. I did a new install of MMTTY and moved the dll to MMTTY
but nothing works. How to get that windo to show up. I even opened
MMTY as a stand alone and still no window....
Rich wrote on 9/24/2025 2:03 PM:
EXTFSK64 needs to be in the same folder/directory as MMTTY.
In MMTTY - Setup goto:
TX - PTT&FSK - Port - Select EXTFSK64 if it is not listed it is
not in the right directory
Once the window appears
Select the standard comport (mine is 8)
FSK Output DTR
PTT Output RTS
I just tested this on mine and it works 100%
Rich
On 9/24/2025 2:52 PM, Courtney Judd wrote:
the 101MP uses USB from the radio to computer with enhanced port
13 and standard is 12. In MMTTY I have it set to EXTFSK64 and I
think thats where the probl;em is. Can't get the drop down window
for that to show up....
Rich via WriteLog wrote on 9/24/2025 1:46 PM:
What RTTY hardware are you using, the USB FSK/AFSK line from
the radio, or an external device for FSK ?
Rich
K3RWN
On 9/24/2025 1:50 PM, Courtney Judd wrote:
Let me go over this again: using FTDX101MP with Writelog and
MMTTY trying to get set up for CQWW RTTY this weekend. All is
setup and seems to be working. Writelog is seeing the correct
frequency and MMTTY is decoding RTTY signals. When I hit any of
the F keys radio goes into TX and MMTTY shows the correct
message and looks like a correct signal going out. RF is going
out but the monitor in the radio only puts out a single tone so
I don't know if it is actually TX RTTY or not. I have looked
every where but can not come up with a fix for this .... any
ideas sure would be welcome! thanks 73's Cort K4WI
Sent from Postbox <https://www.postbox-inc.com>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
Sent from Postbox <https://www.postbox-inc.com>
Sent from Postbox <https://www.postbox-inc.com>
Sent from Postbox <https://www.postbox-inc.com>
Sent from Postbox <https://www.postbox-inc.com>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|