Hi,
Turn off automatic logging or you will likely get duplicate entries of your of
your current QSO when it doesn't end smoothly. Log manually when you are sure
a QSO is complete.
In the contest there will be running (CQ) and S&P stations. At the end of the
QSO, the S&P station will send RR73 to the runner, who should then respond with
73 or CQ TEST or calling a station who tailended
(split) during the RR73 transmission
The S&P station should understand that any one of the above three end means the
QSO was good. A 73 isn't necessary, but some transmission is.
The running station should always respond immediately after receiving the RR73.
It should not take a cycle off and not send anything. Successful running
means keeping things going,
If you are working non-contest stations with the normal, non-contest protocol,
QSOs should end with the S&P station sending 73 as usual. Use TX1 for replying
to CQs so as to include the grid loc.
Good luck and 73,
Ken, AB1J
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|