A few notes for those who might be trying the WW Digit contest for the first
time this weekend. (See https://ww-digi.com/index.htm)
WW Digi only needs grid square. So set your FT software accordingly. But, be
prepared to use manual messages to complete a QSO when you run into someone who
is set up for signal report only or signal report + grid.
In an effort to help separate the contest activity from the crowds on the
standard FT channels, there are suggested frequency ranges in the rules. For
example, 20m FT8 is recommended as 14090-14100. The idea is that you go to
14090, 14092, 14094, etc. You can assume that anyone you find there is likely
in the contest and things should flow smoothly. If one channel gets busy, move
up to the next one.
That said, it is not prohibited to make QSOs on the standard FT4 and FT8
frequencies. It is worth keeping an eye on these, but you may find so much
activity and QRM that it becomes difficult to make contacts. Don't get locked
in to only checking the standard frequencies and becoming frustrated.
Example: Last year it was much easier to work Europe on 80m by moving to a less
crowded channel rather than battling it out on a busy one.
The contest includes 160-10m. You may not expect much on 160 at the end of
August, but you would be surprised at what is possible. It's worth checking
for the mults if nothing else.
Stations are worked once per band. FT4 is faster - when signals are good and
QRM is low. If the band is open, FT4 is the way to go. But, you may see
enough repeats that it flips and you may be better off to do FT8. It's called
using good judgement!
WW Digi uses distance based scoring with multipliers being grid fields. It
definitely pays to try to work stations that are far away.
Give the contest a try. Digi contesting is different, but can provide some fun
hours of DXing and learning.
Have fun!
Randy K5ZD
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|