CQ-Contest
[Top] [All Lists]

[CQ-Contest] help needed to get FLDIGI to copy CW accurately

To: cq-contest@contesting.com
Subject: [CQ-Contest] help needed to get FLDIGI to copy CW accurately
From: DXer <hfdxmonitor@gmail.com>
Date: Fri, 16 Dec 2016 17:45:33 -0500
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Hi Fritz,

I use FLDigi to help me with CW, without it, I would not participate in contests. The operative word here is 'help'. To the best of my knowledge, no morse decoding software will copy code accurately. By accurate I mean between 70-100% consistently.

There are simply too many variables, propagation and sending quality, just to mention two of them.

That said, I keep squelch active, but not more than 5 or 10 % of the scale. All other settings are left at default. Also, try putting the receiver in LSB mode.

That gibberish mixed with the actual signal on the second line, could indicate that the squelch was set too low or off.

Sorry if could not be of more help.

73 de Vince, VA3VF

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>