CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Sourcing ferrites and flooded heat shrink

To: Richard Thorne <rthorne@rthorne.net>, <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] Sourcing ferrites and flooded heat shrink
From: Gerry Hull <gerry@yccc.org>
Date: Wed, 22 Jul 2015 12:32:55 -0400
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Electronic Surplus Sales in Manchester NH has miles of adhesive flooded heat 
shrink at very reasonable surplus prices.  This is in the retail store, but if 
you call I bet they will ship you some.

73,

Gerry W1VE

-----Original Message-----
From: "Richard Thorne" <rthorne@rthorne.net>
Sent: ‎7/‎22/‎2015 9:35 AM
To: "cq-contest@contesting.com" <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] Sourcing ferrites and flooded heat shrink

Pete,

Check out fastenal . com  Do a search on adhesive-lined heat shrink. 
They have a local outlet here and they had various sizes on a rack at 
the store.  It's a little pricey but it works very well.  Heat it up, it 
shrinks and towards the end of the process a little of the glue ridge 
sets up nice around the joint assuring you that you have a nice seal.

I bought a few packages of the heavy wall .80" diameter x 6" long 
adhesive lined heat shrink to fit over N connectors that will be 
installed on LMR-600.

Ordering on line is fast.  I ordered a bunch of galvanized hardware for 
a tower project, the web site is very easy to use,  especially for order 
bolts,nuts and washers.

Rich - N5ZC

On 7/21/2015 10:24 PM, Peter Dougherty (W2IRT) wrote:
> Hi all,
> I’ve got a few projects on the go during the summer season and I’m trying to
> find sources for the right items that would be useful to hams. First off,
> I’m trying to put out some rather serious RFI fires with ferrites. I’ve used
> up all the ones I bought 10+ years ago and I didn’t keep the packaging to
> record the part numbers. I’m after Mix 31 torroids (Fair-Rite) with
> diameters from 1” to about 2 or 2.5” and snap-ons in various sizes from 1/8”
> to ½” (and are any specifically sized for .405” coax?). Maybe I’m going
> senile in my old age, but I just can’t find what I’m looking for in their
> online catalogue.
>
> Second thing I’m after is some flooded heat shrink for weatherproofing coax
> fittings. At least I think that’s the correct terminology. I recall putting
> on some Andrews N-connectors back in the day and the small section of heat
> shrink provided was really nice stuff.
>
>   
>
> Thanks in advance.
>
> ---------------------------------------------
> Peter, W2IRT
>
> www.facebook.com/W2IRT
>
>   
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
<Prev in Thread] Current Thread [Next in Thread>