Art,
There is another wiring option for using the (wonderful) CM500 with an Icom
radio. Install an interrupting 1/8" mono jack on the rear of your SM6
microphone's base. When the CM500 is not plugged in, the SM6 works as usual.
WhHen you insert the Yamaha plug, the SM6 amp & its DC bias & the CM500
provide the audio. Works great.
-larry (K8UT)
-----Original Message-----
From: Art Boyars
Sent: Monday, December 29, 2014 10:43 AM
To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Yamaha CM500
Many of you have recommended them (and not for the first time).
KL7RA says "They plug into the $8 Syba SD-CM-UAUD USB Stereo Audio Adapter
to provide the correct DC for the mic which also provides an excellent
soundcard for the WinTest Digital Voice Keyer option."
But from the B and H Photo web site, it says:
*Note!* * Do not use phantom power. The maximum voltage is 15v which is
provided by the included bias adapter.*
So, do you need the Syba (or whatever) external box to get the DC, or does
the CM500 come with an adapter (and the Syba is just for those other
functions that Rich mentioned)?
73, Art K3KU
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|