Remotely mount the speaker.
I did this, it was sooo loud afterwards, that I had to put a pot on it
to be able to adjust the volume. I drilled a small 1/8" hole just above
the "Y" in WinKeyer USB printed on the front panel. Painted the insides
of the hole black, and with some silicone glue stuck the tiny speaker
hole so it lines up with this hole. It is amazingly LOUD. like I said
so Loud I had to add a Pot on it. And it is soo loud the pot rarely
gets above a 1 on the 0 to 10 equivalent scale. During Field Day it
maybe got up to a 4 or so at the most.
>Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 11/5/2014 4:57 PM, Dave Hachadorian wrote:
I just switched my SO2R CW sending setup to a Winkeyer USB. It works
great, except that the little piezo buzzer in there is pretty wimpy,
and I can't hear my own sending, with earphones on, when I have to use
the paddle. I run with the CW monitors in the rigs turned off, so I
don't have to listen to all that useless racket while automated
messages are being sent.
I'll bet someone has come up with a creative solution to this little
problem, so please fill me in.
Thanks in advance.
Dave Hachadorian, K6LL
Yuma, Arizona
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|