>
> I'm using a Tailtwister and recently added control via a Rotor-EZ. Writelog
> "knows" Rotor-EZ (and Green Heron and others). Pressing <alt-a> sends the
> rotor to the bearing of the station in the call-entry line.
>
> 73,
>
> de Hans, K0HB
> --
> "Just a boy and his radio"
>
>
> On Oct 25, 2012, at 20:08, "Gary AL9A" <al9a@mtaonline.net> wrote:
>
>> Hans has made a timely posting, at least for me. I have never had my rotor,
>> a Create Design RC5A, interfaced to WL because it is too old and the
>> controller lacks the communication ability. The rotor is still going, but
>> my control box is beginning to show its age and is giving me problems. I am
>> considering replacing it with the Green Heron RT-21 which would allow me to
>> interface the control box with WL. It uses a "superset" of the DCU-1
>> protocol so I should be able to define it correctly to work in WL.
>>
>> My question is after getting the rotor interfaced to WL, how do I control
>> it? I haven't found anything in the Help manual yet about sending commands
>> from WL to the controller. I wouldn't want the rotor to start turning to a
>> different direction each time I enter a call with a different beam heading,
>> but how is this controlled from the program? Any help before I slap my
>> credit card on the counter would be appreciated.
>>
>> 73,
>> Gary AL9A
>>
>>
>> ----- Original Message ----- From: "Radio K0HB" <kzerohb@gmail.com>
>> To: <PstRotator@yahoogroups.com>; "WriteLog Reflector"
>> <writelog@contesting.com>
>> Sent: October 25, 2012 11:31 AM
>> Subject: Re: [WriteLog] [PstRotator] Re: Newbie question PstRotatorAZ
>>
>>
>>> And nothing happens.
>>>
>>> I have set up first PstRotatorAZ, clicked “Tracking”, and selected WriteLog
>>> from tracker list. A small “DDE” window is opened.
>>>
>>> Then opened WriteLog to setup new contest (CQWW DX). In setup of rotator,
>>> selected “MSG” and “Sartek” as shown on page 28.
>>>
>>> Now, from main Writelog operating screen, nothing seems to affect the
>>> rotator. (Previously <alt-a> would set rotor bearing)
>>>
>>> What next?
>>>
>>> 73, de Hans, K0HB
>>> --
>>> "Just a boy and his radio"
>>> --
>>> Proud Member of:
>>> A1 Operators - http://www.arrl.org/a-1-op
>>> Minnesota Wireless contesters - http://www.W0AA.org
>>> Arizona Outlaws contesters - http://www.arizonaoutlaws.net
>>> Twin City DX Assn - http://www.tcdxa.org
>>> Lake Vermilion DX Assn - http://www.lvdxa.org
>>> CWOps - http://www.cwops.org
>>> SOC - http://www.qsl.net/soc
>>> Twin City FM Club - http://tcfmc.org
>>> --
>>> Superstition trails --> http://oldslowhans.wordpress.com/
>>> Sea stories here ---> http://k0hb.wordpress.com/
>>> Request QSL at ---> http://www.clublog.org/logsearch/K0HB
>>> All valid QSL requests honored with old fashioned paper QSL!
>>> LoTW participant
>>>
>>>
>>> From: Codrut
>>> Sent: Thursday, October 25, 2012 6:44 PM
>>> To: PstRotator@yahoogroups.com
>>> Subject: [PstRotator] Re: Newbie question
>>>
>>> The answer is yes. You can find how to set Writelog to communicate with
>>> PstRotatorAz in the User Manual (Help / User manual), page 28.
>>>
>>> --- In mailto:PstRotator%40yahoogroups.com, "K0HB" <kzerohb@...> wrote:
>>>>
>>>> Please excuse questions from a FNG at the foot of the steep part of the
>>>> learning curve. Just bought and registered PstRotatorAZ this afternoon.
>>>>
>>>> My two logging programs are WriteLog for contesting and CommCat for
>>>> general purpose logging.
>>>>
>>>> My rotor is a Tailtwister, using Rotor-EZ from Idiom Press.
>>>>
>>>> The documentation for PstRotator tells me that it will interface with (for
>>>> example) Writelog.
>>>>
>>>> Now WriteLog already can run my Rotor-EZ (just press <alt-a> and WriteLog
>>>> sends new bearing to Rotor-EZ.
>>>>
>>>> I have other reasons for using PstRotatorAZ, but wondering what (if any)
>>>> additional function does PstRotatorAZ throw into the mix beyond the native
>>>> WriteLog capability?
>>>
>>>
>>>
>>> __._,_.___Reply via web post Reply to sender Reply to group Start a New
>>> Topic Messages in this topic (2)
>>>
>>> Recent Activity: a.. New Members 4
>>> Visit Your Group
>>> Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use • Send us
>>> Feedback .
>>>
>>> __,_._,___
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web: http://www.writelog.com/
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|