I used to get "TVI" which was not technically "TV" interferences - RF was
getting into speaker wires between an amplifier and big acoustic
system standing on the floor.
A few clamp-on ferrite solved the problem.
K2BB
On Mon, Jan 10, 2011 at 4:14 PM, Robert Brandon <rb@austin.rr.com> wrote:
> Good point, but a little tricky to make.
>
> I once persuaded a neighbor of mine to let me try some chokes, etc. on his
> equipment by explaining that I had zero interference to my own equipment
> after doing this -- and pointing out that my equipment was much closer to
> my
> antennas than his.
>
> Robert K5PI
>
> -----Original Message-----
> From: cq-contest-bounces@contesting.com
> [mailto:cq-contest-bounces@contesting.com] On Behalf Of Bryon PAUL Veal
> n0ah
> Sent: Monday, January 10, 2011 2:37 PM
> To: John Geiger; cq-contest@contesting.com
> Subject: Re: [CQ-Contest] Power levels and TVI
>
> John,
>
> I have been through this many times helping others- maybe suggest a few
> things AFTER their cable provider comes out and they have a certified
> electrician check out their home for possible loose grounds, etc...- many
> companies can throw some chokes on their equipment cables at no cost to
> you-
>
> remember, politely speaking, it is your neighbors problem, not yours- They
> need to take ownership of their equipment's problems- Cure 95% of what is
> happening, the remaining 5% becomes their 100% again- GL
>
> 73 paul N0AH
>
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|