> I've had my K3 for about a year now, and for CW contests I typically use
> the 250 Hz 8-pole roofing filter (which is actually something over 300 Hz
> wide) and have the DSP set to 300 Hz. Key clicks have now become my
> biggest complaint ... I can slide up to within 200 Hz of an S9+20 signal
> and never hear him if he has a clean signal, but key clicks are often much
> wider than that. Given the number of truly horrible clicks coming from
> some of the more active contesters out there, I'm of the opinion that many
> of them do it intentionally to give themselves more elbow room. It makes
> me wonder if that would prevent those guys from ever buying a K3, since
> Elecraft has wisely (in my opinion) made the CW waveform fixed ... it
> cannot be adjusted by the user.
You might be right on that. Some others have mentioned the fact that you
can 'get within 200 cycles' of another station and just keep on operating.
What it that other station has a 400 or 500 cycle filter in HIS radio. Is
he supposed to just move and find another spot to operate? May be quit
contesting because his radio is now inadequate?
I noticed today during the NAQP on 20, I had been on 14.119 for over an
hour and all of a sudden someone showed up almost right on top of me and
started CQ'ing. He was loud, so I know he would have been able to hear me
alright. I was kind of wishing at the time I could have made my signal a
lot wider!! 73
Tom W7WHY
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|