CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] MS Question

To: CQ Contest <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] MS Question
From: Steve London <n2icarrl@gmail.com>
Reply-to: n2ic@arrl.net
Date: Sat, 22 Nov 2008 15:01:51 -0700
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Roger Huntley wrote:
> The run station (0) is on 15 running and the mult station (1) is on 20
> picking off mults.  Both stations have been on their respective bands for
> over 10 minutes.  My question is can the mult station (1) continue on 20 but
> now is running stations working any and all.  The run station (0) stays on
> 15 now just working mults?  Can either station be the run station or do you
> have to designate one of the stations as the run station and have him stay
> as the run station throughout the contest?
> Thanks,
> Roger, W7VV

Your example is perfectly within the rules, but a little misstated. It should 
be 
this:

Station A is the RUN station, on 15 meters
Station B is the MULT station, on 20 meters

At time > 10 minutes

Station A becomes the MULT station, on 15 meters
Station B becomes the RUN station, on 20 meters

As long as your submitted Cabrillo log correctly indicates 0 (RUN), and 1 
(MULT) 
  in the rightmost column, all is well.

73,
Steve, N2IC
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>