After reading quite a bit on the WWW about SO2R....
I am assuming that you place band pass filters (what ever ilk) in line with
BOTH radios. That being the case (if it is) then using bandpass filters on 40
you would be knocking down (but not eliminating) the harmonics on 20 meters.
In addition if you have a 20 meter filter on your second radio, that do would
have attenuation on the 7 Mhz energy. So if the transmit filter on 40
is...say....40 db down and the receive filter on the 20 meters station is
another 40 db down....would not those figures combine? That is a question!
So, you are protecting the 20 meter radio from the 40 meter radio.
That means you would have to have filters for 6 bands times 2 or 12 filters. if
you were running 160, 80, 40, 20, 15, and 10 meters. I guess you could use a
manual six position switch to select the Radio 1 filter and the Radio 2 filter.
That would mean using passband filters...that you would need to switch the
filter to the band you were on and all is well. Now, alot of S02R ops use
automatic switchers (I am sure they found that to be less expensive in the long
run that sending in the radio for repair)...but one could get away with the
manual switch if you were "careful." This is only a good way of doing things
if it is a bandpass filter.
Is the logic OK....I know I am running in the dark with a pair of scissors?
I hope I am not showing my stupidity here....but I am learning.
Lee - K0WA
"I think I barefoot too"
In our day and age it seems that Common Sense is in short supply. If you don't
have any Common Sense - get some Common Sense and use it. If you can't find
any Common Sense, ask for help from somebody who has some Common Sense. Is
Common Sense divine?
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|