CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] K1EA DVP Schematic

To: "Mark Steven Williams" <K9GX@N4GN.COM>,"Ted Bryant" <w4nz@comcast.net>, <CQ-Contest@contesting.com>,"Pete Smith" <n4zr@contesting.com>
Subject: Re: [CQ-Contest] K1EA DVP Schematic
From: "Robert Pack (NX5M)" <nx5m@txcyber.com>
Date: Fri, 9 Jun 2006 07:50:41 -0500
List-post: <mailto:cq-contest@contesting.com>
I do not have a schematic of the dvp card but I do have a pinout schematic
from 1992.  It is for a Yaesu.
I could take a picture of it and send it to whoever needs it.

Bob NX5M

----- Original Message -----
From: "Pete Smith" <n4zr@contesting.com>
To: "Mark Steven Williams" <K9GX@N4GN.COM>; "Ted Bryant" <w4nz@comcast.net>;
<CQ-Contest@contesting.com>
Sent: Friday, June 09, 2006 6:52 AM
Subject: Re: [CQ-Contest] K1EA DVP Schematic


> I *think* that when I got my early DVP, the schematics and operating
instructions came bound into my copy of the CT8 manual.  That was a long
time ago, and both the manual and the DVP are long gone, but maybe this'll
help someone find it.  I don't know, come to think of it, if there was a
schematic for the DVP, but I know the audio cable drawings were in there.
>
> 73, Pete N4ZR
>
> At 11:19 PM 6/8/2006, Mark Steven Williams wrote:
> >Ted,
> >
> >When/If you find that information please share it. I've been putting new
> >connectors on my DVP audio/PTT interface cables, eliminating the 8 pin
jack
> >on the "radio" end and replacing with mini and 1/4 inch phone plugs which
> >will plug directly into any Heil "dongle".
> >
> >Anyway I have not been able to locate even a pinout/schematic for the DVP
> >audio cable, let alone a schematic for the DVP card. Let us know what/if
you
> >find anything.
> >
> >73, Mark, K9GX
> >
> >----- Original Message -----
> >From: "Ted Bryant" <w4nz@comcast.net>
> >To: <CQ-Contest@contesting.com>
> >Sent: Thursday, June 08, 2006 2:10 PM
> >Subject: [CQ-Contest] K1EA DVP Schematic
> >
> >
> >>I have a K1EA DVP card which apparently has the PTT stuck "on". Anyone
know
> >>where I can get a
> >> schematic to troubleshoot it? (tried the CT-User reflector with no
luck)
> >>
> >> Thanks and 73,
> >> Ted W4NZ
> >>
> >>
> >>
> >> _______________________________________________
> >> CQ-Contest mailing list
> >> CQ-Contest@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/cq-contest
> >>
> >
> >
> >_______________________________________________
> >CQ-Contest mailing list
> >CQ-Contest@contesting.com
> >http://lists.contesting.com/mailman/listinfo/cq-contest
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
>
>


_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>